Graco-inc 237-695 Bedienungsanleitung PDF herunterladen (Seite 10)

10 308-236

Service

Slide the rear of the needle (2c*) into the front of

the gun. Slide the tool (B), provided with the repair

kit, into the gun, around the needle. Lightly tap the

tool with a hammer or lightly press the tool against

a flat surface to seat the needle. See Fig. 9.

Remove the tool.

CAUTION

apping or pressing the tool too hard may jam the

tool and damage the needle.

Grease the end of the needle.

Grease the dif

fuser/seat threads. Place the new

gasket (2b*) on the dif

fuser/seat (2a*) and screw

the assembly into the fluid housing (6). T

orque to

20–25 ft-lb (27–34 N.m). See Fig. 10.

10.

Install the trigger (8), pivot pin (10) and screw (12).

See Fig. 10.

NOTE:

No needle or trigger adjustment is needed.

Fig. 9

02354

Fig. 10

2a*

2b*

Lubricate,

then torque

to 20–25 ft–lb (27–34 N.m)



02352

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Keine Kommentare

Graco-inc 237-695 Bedienungsanleitung Seite 10