Graco-inc 311141A Bedienungsanleitung PDF herunterladen

311141A

Instructions

Important Safety Instructions

Read all warnings and instructions in this manual.

Save these instructions.

Frame, Roller

- For application of architectural paints and coatings -

Model 244278, Series A

• 9 inch (23 cm) length

• 7/8 inch inlet with 1/2 inch (13 mm) nap roller cover

3000 psi (24.8 MPa, 248 bar) Maximum Working Pressure*

*The best operating pressure is the lowest pressure that pro-

vides an even paint supply to the roller and typically does not

exceed 300 psi (2.1 MPa, 21 bar).

ti6623ab

1 2 3 4 5 6

Inhaltsverzeichnis

Seite 1 - Frame, Roller

311141AInstructionsImportant Safety InstructionsRead all warnings and instructions in this manual. Save these instructions.Frame, Roller- For applicat

Seite 2 - Warnings

Warnings 2 311141AWarningsThe following warnings are for the safe setup, use, grounding, maintenance and repair of this equipment. The excla-mation po

Seite 3 - TIAB

Pressure Relief Procedure311141A 3Pressure Relief Procedure1. Turn power switch OFF and unplug sprayer power cord. 2. Turn spray/prime valve to PRIME

Seite 4 - Cleaning

Cleaning 4 311141ACleaningThis is the procedure for flushing/cleaning the pressureroller. The sprayer and gun you are using may have ad-ditional flush

Seite 5 - TIAB

Parts311141A 5Parts▲Replacement Danger and Warning labels, tags, and cards are available at no cost.Roller CoversWetted Parts:Fluoroelastomer, nylon,

Seite 6 - ASM Standard Warranty

ASM Standard Warranty 6 311141AASM Standard Warranty ASM warrants all equipment referenced in this document which is manufactured by ASM and bearing i