Graco-inc 233940 Bedienungsanleitung PDF herunterladen (Seite 13)

13310548

Oil/Filter Change

Removal

1. Fig. 6. Place drip pan or rags under sprayer to

catch hydraulic oil that drains out.

2. Remove drain plug (40). Allow hydraulic oil to

drain.

3. Unscrew filter (47) slowly -- oil runs into groove

and drains out rear.

Installation

1. Install drain plug (40) and oil filter (47). Tighten oil

filter 3/4 turn after gasket contacts base.

2. Fill with four quarts of Graco hydraulic oil 169236

(5 gallon/20 liter) or 207428 (1 gallon/3.8 liter)

3. Check oil level.

Fig. 6

ti2271a

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Keine Kommentare

Graco-inc 233940 Bedienungsanleitung Seite 13